Nuclear plant Pollutants

ROUTINE RADIOACTIVE RELEASES FROM NUCLEAR REACTORS -
IT DOESN’T TAKE AN ACCIDENT
http://www.world-nuclear.org/info/inf32.html  [Nuclear plant sketches,parts]
http://www.llrc.org/plutonium/subtopic/plutonium_pollution.htm   [Plutonium and Cancer]
http://www.idealist.ws/nuclearpower.php  [How Nuclear plant promoters always tend to bluff the people]
http://www.iaea.org/Publications/Factsheets/English/radlife.html  [safe dose?]
http://www.iaea.org/Publications/Factsheets/English/manradwa.html  [HLW,LILW and other wastes]
http://www.greenpeace.org/raw/content/canada/en/documents-and-links/publications/tritium-hazard-report-pollu.pdf  [Tritium pollution]
http://www.nirs.org/factsheets/routineradioactivereleases.pdf
http://tshivajirao.blogspot.com/2010/04/nuclear-plant-risks-srikakulam-district.html
http://en.wikipedia.org/wiki/Environmental_effects_of_nuclear_power#Radioactive_gases_and_effluents
http://en.wikipedia.org/wiki/Ionizing_radiation
http://whqlibdoc.who.int/monograph/WHO_MONO_46_%28p381%29.pdf

What you are not supposed to know:
1) It doesn’t take an accident for a nuclear power plant to release radioactivity into our air, water
and soil. All it takes is the plant’s everyday routine operation, and federal regulations permit
these radioactive releases.
2) Radioactivity is measured in "curies." A large medical center, with as many as 1000
laboratories in which radioactive materials are used, may have a combined inventory of only
about two curies. In contrast, an average operating nuclear power reactor will have
approximately 16 billion curies in its reactor core. This is the equivalent long-lived radioactivity
of at least 1,000 Hiroshima bombs.
3) A reactor’s fuel rods, pipes, tanks and valves can leak. Mechanical failure and human error
can also cause leaks. As a nuclear plant ages, so does its equipment - and leaks generally
increase.
4) Some contaminated water is intentionally removed from the reactor vessel to reduce the
amount of the radioactive and corrosive chemicals that damage valves and pipes. The water is
filtered and then either recycled back into the cooling system or released into the environment.
5) A typical 1000-megawatt pressurized-water reactor (with a cooling tower) takes in 20,000
gallons of river, lake or ocean water per minute for cooling, circulates it through a 50-mile maze
of pipes, returns 5,000 gallons per minute to the same body of water, and releases the remainder
to the atmosphere as vapor. A 1000-megawatt reactor without a cooling tower takes in even more
water--as much as one-half million gallons per minute. The discharge water is contaminated with
radioactive elements in amounts that are not precisely known or knowable, but are biologically
active.
6) Some radioactive fission gases, stripped from the reactor cooling water, are contained in decay
tanks for days before being released into the atmosphere through filtered rooftop vents. Some
gases leak into the power plant buildings’ interiors and are released during periodic "purges" and
"ventings." These airborne gases contaminate not only the air, but also soil and water.
7) Radioactive releases from a nuclear power reactor’s routine operation often are not fully
detected or reported. Accidental releases may not be completely verified or documented.
8) Accurate, economically-feasible filtering and monitoring technologies do not exist for some of
the major reactor by-products, such as radioactive hydrogen (tritium) and noble gases, such as
krypton and xenon. Some liquids and gases are retained in tanks so that the shorter-lived
radioactive materials can break down before the batch is released to the environment.
9) Government regulations allow radioactive water to be released to the environment containing
"permissible" levels of contamination. Permissible does not mean safe.
10) Detectors at reactors are set to allow contaminated water to be released, unfiltered, if below
"permissible" legal levels.
11) The Nuclear Regulatory Commission relies upon self-reporting and computer modeling from
reactor operators to track radioactive releases and their projected dispersion. A significant
portion of the environmental monitoring data is extrapolated – virtual, not real.
12) Accurate accounting of all radioactive wastes released to the air, water and soil from the
entire reactor fuel production system is simply not available. The system includes uranium mines
and mills, chemical conversion, enrichment and fuel fabrication plants, nuclear power reactors,
and radioactive waste storage pools, casks, and trenches.
Increasing economic pressures to reduce costs, due to the deregulation of the electric power
industry, could further reduce the already unreliable monitoring and reporting of radioactive
releases. Deferred maintenance can increase the radioactivity released - and the risks.
13) Many of the reactor’s radioactive by-products continue giving off radioactive particles and
rays for enormously long periods – described in terms of "half-lives." A radioactive material
gives off hazardous radiation for at least ten half-lives. One of the radioactive isotopes of iodine
(iodine- 129) has a half-life of 16 million years; technetium-99 = 211,000 years; and plutonium-
239 = 24,000 years. Xenon-135, a noble gas, decays into cesium-135, an isotope with a 2.3
million-year half-life.
14) It is scientifically established that low-level radiation damages tissues, cells, DNA and other
vital molecules – causing programmed cell death (apoptosis), genetic mutations, cancers,
leukemia, birth defects, and reproductive, immune and endocrine system disorders.